Sales & free installation
Pureit water purifiers for Bangalore homes and offices
Four models covering the full range of Bengaluru water — from 200 ppm treated Cauvery supply in the older localities to 1,400 ppm borewell in the outer belts. Prices below include free installation and a first-year filter check.
Compare Pureit models
| Model | Type | Bangalore price | Capacity | Handles TDS | Stages | Best for |
|---|---|---|---|---|---|---|
| Pureit Vital Max RO + UV + UF | RO + UV + UF | ₹17,490 | 8 L storage | Up to 2000 ppm | 7 | Borewell and tanker water in outer Bangalore |
| Pureit Copper Charge RO | Copper RO | ₹21,990 | 7 L storage | Up to 1800 ppm | 8 | Families who want copper-enriched RO water |
| Pureit Classic Gravity 20 L | Gravity (non-electric) | ₹3,290 | 20 L (9 L purified) | Up to 500 ppm | 4 | Cauvery-supplied homes, PGs and rented flats |
| Pureit UV Inline Whole-Tap | UV Inline | ₹9,490 | Continuous flow, 2 L/min | Up to 200 ppm | 3 | Low-TDS Cauvery supply, cafes and clinics |
The four models we install across the city

RO + UV + UF
Pureit Vital Max RO + UV + UF
Our most-installed model in Bangalore. Handles high-TDS borewell and tanker supply with a 7-stage line-up, and keeps working through 2–3 hour power cuts thanks to the 8 litre pressurised tank.
- 7-stage RO + UV + UF purification with mineral cartridge
- Handles TDS up to 2000 ppm — suitable for borewell supply
- Filter-life indicator with auto shut-off on cartridge expiry
- Food-grade ABS tank, 8 L storage for power-cut days

Copper RO
Pureit Copper Charge RO
Adds a controlled dose of copper back into RO water after purification, with a dedicated hot-water-safe tap. A popular upgrade in Jayanagar, Malleshwaram and Indiranagar homes.
- 8-stage purification with copper-infusion chamber
- Dial-controlled copper dosing — switch it off any time
- Separate dispensing tap for copper and normal water
- Digital display for TDS, copper mode and filter life

Gravity (non-electric)
Pureit Classic Gravity 20 L
No electricity, no plumbing, no drain line. Ideal where the supply is treated Cauvery water and you only need microbiological safety — and easy to carry when you shift flats.
- 4-stage germkill purification without electricity
- 20 L capacity with 9 L purified water chamber
- Germkill life indicator turns red before it expires
- No installation, no drain, zero water wastage

UV Inline
Pureit UV Inline Whole-Tap
Fits out of sight under the sink and treats every litre that reaches the tap. Recommended only where TDS is already low, so nothing is wasted removing salts you do not have.
- Under-sink installation — no counter or wall space used
- Continuous 2 L/min flow with no storage tank
- UV chamber with lamp-failure alarm
- Zero reject water — nothing goes down the drain
Verified customer reviews
What customers say after installation
Reviews from households where we specified and fitted the unit ourselves.
I run a 24-bed PG and had replaced two purifiers in three years. They explained the units were simply too small for the load, fitted a commercial housing, and it has been steady for over a year.
Called at 11 AM about no water flow, technician was in by 2:30 PM and replaced the solenoid valve on the spot. Got the service report on WhatsApp before he left the building.
Survey picked up that our inlet pressure was too low before installation, so the booster pump was fitted the same day rather than becoming a complaint later. Sensible way to work.
Questions & answers
Choosing a water purifier in Bangalore
Questions about models, running costs and warranty. For locality water quality, see your area page.
How do I know whether I need RO or a simpler purifier?
The deciding number is your inlet TDS. Below roughly 300 ppm, a gravity or inline UV unit gives you microbiologically safe water without stripping minerals or wasting reject water. Above 500 ppm, RO is the only technology that removes dissolved salts. Between the two, hardness and taste usually decide it. We measure the number at your tap free of charge rather than guessing from your pincode.
Why is the RO model more expensive to run than the gravity model?
An RO unit uses electricity, sends roughly two litres to the drain for every litre purified, and has a membrane that needs replacing every 14 to 24 months depending on your water. A gravity purifier has none of those costs. If your supply genuinely does not need RO, the cheaper unit is also the better unit — which is why we test first.
Is copper-enriched water actually worth the price difference?
It is a preference, not a purification upgrade. The copper chamber adds a controlled dose of copper back into water that RO has already made safe. Customers who previously stored water in copper vessels tend to value it; if you are choosing purely on water safety, the standard RO model gives you the same protection for less.
What warranty comes with a new purifier?
Every new unit carries a one-year comprehensive manufacturer warranty covering the pump, solenoid valve, UV assembly and electronics. Consumable cartridges and the RO membrane are excluded, as they are on every brand. Installation by us is free and does not affect the warranty.
Can I see the price difference between models before a technician visits?
Yes — every model page lists the Bangalore price, the MRP, capacity, TDS handling range and the number of purification stages. The technician visit is for measuring your water, not for revealing pricing.
Do you take the old purifier away when installing a new one?
We can uninstall and dispose of it responsibly on request, at no charge, when we install a replacement. If the old unit is a Pureit model still worth servicing, we will tell you that instead — a membrane change is often cheaper than a new purifier.
Not sure which model your water needs?
A free at-home test gives you the TDS, hardness and chlorine numbers in writing. We then recommend a model against those readings — and tell you if the cheaper unit is the right one.